 |  |  |
|---|
TRAINING OF
EXCELLENCE
AND CUSTOMER
FULFILLMENT
State-of-the-art infrastructure, environment that stimulates learning and highly trained instructors. The Robiel Training Center has trained more than 3,000 students, preparing and updating them with new repair techniques, optimizing workshop time and increasing customer satisfaction.
BECOME A SPECIALIST
COMMON RAIL
PUMPS AND INJECTORS
COMMON RAIL
PUMPS AND INJECTORS
PUMPS -Bosch - CP1H and CP3 | Denso - HP3 and HP4 | Delphi - Sprinter, HR and Kia 2700.
INJECTORS - Bosch - CRIN 1, CRIN 2, CRIN 3, CRI 2.0, CRI 2.2 and Piezo
Denso - G2 e G3 | Siemens and Continental - Piezo | Delphi
• Operation and diagnostics of high pressure pumps and common rail injectors systems: Bosch, Denso, Siemens and Continental;
• Procedure for disassembling and assembling the high pressure pumps and Common Rail Injectors, with evaluation of the working, wear and recovery conditions;
• Evaluation of the electric system of the injector, solenoid (coil) with the adjustments of the inductive or capacitive values necessary for the proper functioning of the common rail injectors
• Training with the procedures applied in the process of recovery the Common Rail high pressure pumps and exchange of CP3 elements;
• Diagnosis and regulation of the gear pump (low pressure pumps) working pressure, which works in conjunction with the high pressure pump model CP3. Gear change
• Adjustment tests using Hartridge electronic test bench.
Sabre CRI Expert
- WORKLOAD: 24 hrs
COMMON RAIL
PUMPS AND INJECTORS
COMMON RAIL
PUMPS AND INJECTORS
PUMPS -Bosch - CP1H and CP3 | Denso - HP3 and HP4 | Delphi - Sprinter, HR and Kia 2700.
INJECTORS - Bosch - CRIN 1, CRIN 2, CRIN 3, CRI 2.0, CRI 2.2 and Piezo
Denso - G2 e G3 | Siemens and Continental - Piezo | Delphi
Sabre CRI Expert
• Operation and diagnostics of high pressure pumps and common rail injectors systems: Bosch, Denso, Siemens and Continental;
• Procedure for disassembling and assembling the high pressure pumps and Common Rail Injectors, with evaluation of the working, wear and recovery conditions;
• Evaluation of the electric system of the injector, solenoid (coil) with the adjustments of the inductive or capacitive values necessary for the proper functioning of the common rail injectors
• Training with the procedures applied in the process of recovery the Common Rail high pressure pumps and exchange of CP3 elements;
• Diagnosis and regulation of the gear pump (low pressure pumps) working pressure, which works in conjunction with the high pressure pump model CP3. Gear change
• Adjustment tests using Hartridge electronic test bench.
- WORKLOAD: 24 hrs
COMMON RAIL
PUMPS AND INJECTORS
COMMON RAIL
PUMPS AND INJECTORS
PUMPS -Bosch - CP1H and CP3 | Denso - HP3 and HP4 | Delphi - Sprinter, HR and Kia 2700.
INJECTORS - Bosch - CRIN 1, CRIN 2, CRIN 3, CRI 2.0, CRI 2.2 and Piezo
Denso - G2 e G3 | Siemens and Continental - Piezo | Delphi
• Operation and diagnostics of high pressure pumps and common rail injectors systems: Bosch, Denso, Siemens and Continental;
• Procedure for disassembling and assembling the high pressure pumps and Common Rail Injectors, with evaluation of the working, wear and recovery conditions;
• Evaluation of the electric system of the injector, solenoid (coil) with the adjustments of the inductive or capacitive values necessary for the proper functioning of the common rail injectors
• Training with the procedures applied in the process of recovery the Common Rail high pressure pumps and exchange of CP3 elements;
• Diagnosis and regulation of the gear pump (low pressure pumps) working pressure, which works in conjunction with the high pressure pump model CP3. Gear change
• Adjustment tests using Hartridge electronic test bench.
Sabre CRI Expert
- WORKLOAD: 24 hrs
COMMON RAIL
PUMPS AND INJECTORS
COMMON RAIL
PUMPS AND INJECTORS
PUMPS -Bosch - CP1H and CP3 | Denso - HP3 and HP4 | Delphi - Sprinter, HR and Kia 2700.
INJECTORS - Bosch - CRIN 1, CRIN 2, CRIN 3, CRI 2.0, CRI 2.2 and Piezo
Denso - G2 e G3 | Siemens and Continental - Piezo | Delphi
Sabre CRI Expert
• Operation and diagnostics of high pressure pumps and common rail injectors systems: Bosch, Denso, Siemens and Continental;
• Procedure for disassembling and assembling the high pressure pumps and Common Rail Injectors, with evaluation of the working, wear and recovery conditions;
• Evaluation of the electric system of the injector, solenoid (coil) with the adjustments of the inductive or capacitive values necessary for the proper functioning of the common rail injectors
• Training with the procedures applied in the process of recovery the Common Rail high pressure pumps and exchange of CP3 elements;
• Diagnosis and regulation of the gear pump (low pressure pumps) working pressure, which works in conjunction with the high pressure pump model CP3. Gear change
• Adjustment tests using Hartridge electronic test bench.
- WORKLOAD: 24 hrs
INJECTION UNITS
MODEL EUI AND EUP
MBB serie 900 and 457 | SCANIA | IVECO and IVECO Euro 5 | VOLVO D12A, D12C, D12D and D13A
• Diagnosis of the injection units models: Ui's and Up's with measurement of injected fuel volume (fuel flow);
• Diagnosis with the use of the solenoid (coil) working condition multimeter of the Ui's and Up's injection units;
• Procedures for disassembling and assembling Ui's and Up's injector units, with evaluation of the working conditions, wear, exchange of repairs and parts needed in the recovery
• Concept of the Ui's and Up's injection units operation with the work phases that are carried out in the injection process
• Training and working techniques for fuel control valve seal recovery, with its seat in the unit
• Training and working techniques for measuring and adjusting the opening stroke of the fuel control valve
• Training and working techniques for measuring and regulating the docking current of the Ui's and Up's injection units
• Training and techniques for measuring and regulating the opening pressure of the injector nozzles of the Ui's and Up's units;
• Tips for failures in vehicles caused by defective injector units
• Simulation of defects in Ui's and Up's injection units, to improve the practice of work with the procedures performed in the recovery and adjustment of units;
Hk EUI 1400
- WORKLOAD: 24 hrs
COMMN RAIL PUMPS AND INJECTORS
CATERPILLAR C4 | C6
• Operation and diagnostics of high pressure pumps and common rail injectors systems: CAT C4 / C6
• Procedure for disassembling and assembling the high pressure pumps and Common Rail Injectors, with evaluation of the working, wear and recovery conditions;
• Evaluation of the electric system of the injector, solenoid (coil) with the adjustments of the inductive values necessary for the proper functioning of the common rail injectors;
• Training with the procedures applied in the process of the Common Rail high pressure pumps recovery and exchange of elements CP3
• Diagnosis and adjustment of the gear pump (low pressure pumps) working pressure, which works in conjunction with the high pressure pump;
• Adjustment tests using Hartridge electronic test bench.
- WORKLOAD: 16 hrs
Sabre CRI Master/Expert
robiel headquarter
Estrada Municipal José Costa de Mesquita, 823 - Galpão 02 - Chácara Alvorada. Indaiatuba . SP - Cep: 13.337-200
Phone: +55 19 3515.1800
BRANCHES ROBIEL
Paraná - Maringá
Av. Jinroku Kubota, 2751 . Jd. Pinheiros
Cep: 87047-190
Tel: 0800 601 3354
Santa Catarina - Itajaí
Rua Pedro Pereira Mafra, 159. Ressacada
CEP: 88307-320
Tel: 0800 601 3354
Rio Grande do Sul - Porto Alegre
Rua Avaré, 341 - Jd. Floresta
Cep: 91040-440
Tel: 0800 601 3354
Minas Gerais - Contagem
Av. General David Sarnoff, 5140 . Cidade Industrial
Cep: 32210-110
Tel: 0800 601 9801
Goiás - Goiânia
Av. Consolação,1304 . Quadra F . Lote 5 . Ind Mooca
Cep: 74420-175
Tel: 0800 601 9801