top of page
DSC_6383
DSC_6379
DSC_6363

TRAINING OF
 EXCELLENCE
AND CUSTOMER 
FULFILLMENT

State-of-the-art  infrastructure, environment that stimulates learning and highly trained instructors. The Robiel Training Center has trained more than 3,000 students, preparing and updating them with new repair techniques, optimizing workshop time and increasing customer satisfaction.

CT.png

BECOME A SPECIALIST

COMMON RAIL 01 ​

COMMON RAIL ​
PUMPS AND INJECTORS

Bosch - CP3 | Denso - HP3 (L200 / Nissan Frontier) - HP4 (John Deere) - HP5 (Hilux 2017)
Bosch - CRI 2.0 / CRI 2.2 / CRIN 1 /  CRIN 2 / CRIN 3
Piezo Continental e Siemens - (Ranger 2.2 / 3.0 / 3.2 | Troller | Transit)
Denso - G2 (L200 / Nissan Frontier / Hilux após 2012) - G3 (L200 / Nissan Frontier / S10 / Transit / John Deere até 2012) - G4 (Hilux 2017)

• Operation and diagnostics of high pressure pumps and common rail           injectors systems: Bosch, Denso, Siemens and Continental;

• Procedure for disassembling and assembling the high pressure pumps     and Common Rail Injectors, with evaluation of the working, wear and           recovery conditions;

• Evaluation of the electric system of the injector, solenoid (coil) with the       adjustments of the inductive or capacitive values necessary for the             proper functioning of the common rail injectors

• Training with the procedures applied in the process of recovery the             Common Rail high pressure pumps and exchange of CP3 elements;

• Diagnosis and regulation of the gear pump (low pressure pumps)               working pressure, which works in conjunction with the high pressure           pump model CP3. Gear change

• Adjustment tests using Hartridge electronic test bench. 

Hartridge Sabre CRi Expert.png

Saber CRI expert

 
- WORKLOAD: 24 hrs

COMMON RAIL ​ 02

COMMON RAIL ​
PUMPS AND INJECTORS

Bosch - CP4 (Iveco Daily Euro 5 / Amarok V6) - CP1H (Ducato Multijet)
Denso - HP3 (L200 / Nissan Frontier) - HP4 (John Deere)
Delphi (Sprinter / HR / KIA 2700)
Continental / Siemens  (Ranger 2.2 / 3.0 / 3.2 / Troller / Transit)
Denso - G2 (L200 / Nissan Frontier / Hilux até 2012) - G3 (L200 / Nissan Frontier / S10 / Transit
John Deere após 2012
Delphi (Sprinter / HR / Kia 2700
Bosch Piezo (Iveco Daily Euro 5  / Amarok V6)
520 (Ducato Multijet)
Hartridge Sabre CRi Expert.png

Sabre CRI Expert

• Operation and diagnostics of high pressure pumps and common rail           injectors systems: Bosch, Denso, Siemens and Continental;

• Procedure for disassembling and assembling the high pressure pumps     and Common Rail Injectors, with evaluation of the working, wear and           recovery conditions;

• Evaluation of the electric system of the injector, solenoid (coil) with the       adjustments of the inductive or capacitive values necessary for the             proper functioning of the common rail injectors

• Training with the procedures applied in the process of recovery the             Common Rail high pressure pumps and exchange of CP3 elements;

• Diagnosis and regulation of the gear pump (low pressure pumps)               working pressure, which works in conjunction with the high pressure           pump model CP3. Gear change

• Adjustment tests using Hartridge electronic test bench. 

 
- WORKLOAD: 24 hrs

COMMON RAIL ​03

COMMON RAIL ​
PUMPS AND INJECTORS

Scania EURO 6 
Caterpillar C4 / C6
Scania - Euro 6
DAF
Caterpillar C4 / C6

 

• Operation and diagnostics of high pressure pumps and common rail           injectors systems: Bosch, Denso, Siemens and Continental;

• Procedure for disassembling and assembling the high pressure pumps     and Common Rail Injectors, with evaluation of the working, wear and           recovery conditions;

• Evaluation of the electric system of the injector, solenoid (coil) with the       adjustments of the inductive or capacitive values necessary for the             proper functioning of the common rail injectors

• Training with the procedures applied in the process of recovery the             Common Rail high pressure pumps and exchange of CP3 elements;

• Diagnosis and regulation of the gear pump (low pressure pumps)               working pressure, which works in conjunction with the high pressure           pump model CP3. Gear change

• Adjustment tests using Hartridge electronic test bench. 

Hartridge Sabre CRi Expert.png

Saber CRI expert

 
- WORKLOAD: 16 hrs

COMMON RAIL ​04

COMMON RAIL ​
INJECTORS

Hilux 6 Fios (Recuperação da Válvula, troca da válvula, mudança na configuração do injetor)
Piezo / Indutivo (Amarok)
Piezo (Iveco Daily)
520 (Ducato Multijet)
Hartridge Sabre CRi Expert.png

Saber CRI expert

• Operation and diagnostics of high pressure pumps and common rail           injectors systems: Bosch, Denso, Siemens and Continental;

• Procedure for disassembling and assembling the high pressure pumps     and Common Rail Injectors, with evaluation of the working, wear and           recovery conditions;

• Evaluation of the electric system of the injector, solenoid (coil) with the       adjustments of the inductive or capacitive values necessary for the             proper functioning of the common rail injectors

• Training with the procedures applied in the process of recovery the             Common Rail high pressure pumps and exchange of CP3 elements;

• Diagnosis and regulation of the gear pump (low pressure pumps)               working pressure, which works in conjunction with the high pressure           pump model CP3. Gear change

• Adjustment tests using Hartridge electronic test bench. 

 
- WORKLOAD: 24 hrs
Imagem HK1400_02.png

INJECTION UNITS
MODEL EUI AND EUP ​

MBB  serie 900 and 457 | SCANIA | IVECO and IVECO Euro 5 | VOLVO D12A, D12C, D12D and D13A

Diagnosis of the injection units models: Ui's and Up's with measurement of                 injected fuel volume (fuel flow);

Diagnosis with the use of the solenoid (coil) working condition multimeter of the Ui's and Up's injection units;

Procedures for disassembling and assembling Ui's and Up's injector units, with           evaluation of the working conditions, wear, exchange of repairs and parts needed in the recovery

Concept of the Ui's and Up's injection units operation with the work phases tha are carried out in the injection process

• Training and working techniques for fuel control valve seal recovery, with its seat  in the unit

Training and working techniques for measuring and adjusting the opening stroke of the fuel control valve

Training and working techniques for measuring and regulating the docking current of the Ui's and Up's injection units

Training and techniques for measuring and regulating the opening pressure of the      injector nozzles of the Ui's and Up's units;

Tips for failures in vehicles caused by defective injector units

Simulation of defects in Ui's and Up's injection units, to improve the practice of            work with the procedures performed in the recovery and adjustment of units;

hk eui 1400

- WORKLOAD: 24 hrs

COMMN RAIL PUMPS AND INJECTORS 
CATERPILLAR C4 | C6

• Operation and diagnostics of high pressure pumps and common rail             injectors systems: CAT C4 / C6

• Procedure for disassembling and assembling the high pressure pumps         and Common Rail Injectors, with evaluation of the working, wear and           recovery conditions;

• Evaluation of the electric system of the injector, solenoid (coil) with the         adjustments of the inductive values necessary for the proper functioning     of the common rail injectors;

• Training with the procedures applied in the process of the Common Rail       high pressure pumps recovery and exchange of elements CP3

• Diagnosis and adjustment of the gear pump (low pressure pumps)               working pressure, which works in conjunction with the high pressure           pump;

• Adjustment tests using Hartridge electronic test bench.

Sabre.png
- WORKLOAD: 16 hrs

Saber CRI Master/Expert

bottom of page